Skip to main content

SuperMicrobiologists

Yeasts and molds: does your packaging really hold up all the way to the consumer?

Published on 30 September 2026 3 min




This article is also available as a podcast in more than 20 languages. Click the ⚙️ Settings icon on YouTube, then choose Audio Track and Subtitles to watch it in your preferred language.



A product leaves the factory with no apparent issue. Yet a few days later, the consumer finds mould on it.

Does this necessarily mean the contamination occurred during production?

Not necessarily. Philippe Armaing says he is receiving more and more requests from manufacturers and retailers facing yeast and mould issues.

Among the possible causes he encounters are changes in packaging, but also the conditions products are exposed to once they reach the store.


Discover the Top 6 Dehydrated Media Suppliers

We asked the SuperMicrobiologists in a big survey.
Here’s what they said.

Why are yeast and mould problems becoming increasingly common?

Apart from pathogens, which microorganisms are causing more and more problems at the moment?

Philippe Armaing: Yeasts and moulds. I am receiving more and more requests from manufacturers and retailers because consumers are finding mould on products.

There is also an important issue around reducing packaging.

Less and less plastic is being used, so packaging is becoming thinner and thinner.

At the same time, retail conditions have changed. They may be more convenient for retailers, but they can be more challenging for the mechanical resistance of the packaging.

And this can create microleaks.

Shelf pushers can put pressure on packaging

How can shelf display conditions cause these microleaks?

We are seeing more and more shelves equipped with pusher systems designed to keep products permanently positioned at the front of the shelf.

The problem is that if these machines are not properly adjusted, they can put too much pressure on the packaging.

This can create microleaks, which then become entry points for all kinds of contamination, especially yeasts and molds.


So in this situation, the contamination did not necessarily occur during production?

Exactly. The product may be recontaminated through a microleak during transport or once it is in the store.

This is why we also need to consider what happens to the product throughout its distribution and retail cycle.

When retailers renovate their stores and replace their shelving systems, the new way products are displayed can have an impact on the packaging.

Changing a recipe or process can also affect yeast and mould risks

Is packaging the only thing to investigate when facing yeast and mould problems?

No. There is also the entire R&D side.

When processes or recipes are changed, these issues need to be considered before the product is launched.

That is not always the case.

The aim is to take all these factors into account when products are modified, so that new recipes or new products do not end up delivering a different level of satisfaction to consumers.



Many thanks to Philippe Armaing for sharing his experience with packaging microleaks and yeast and mould issues.

If you have a question, feel free to ask. We will do our best to answer it.

Leave a Reply

Your email address will not be published. Required fields are marked *