Skip to main content

SuperMicrobiologists

What Is Disinfectant Rotation in the Pharmaceutical Industry?

Published on 4 February 2026 5 min



This article is also available as a podcast in more than 20 languages. Click the ⚙️ Settings icon on YouTube, then choose Audio Track and Subtitles to watch it in your preferred language.



Have you ever heard about disinfectant rotation?

So have we.

And like many people, we thought we understood it well… Just changing disinfectants from time to time to avoid microorganisms developing resistance.

Well… in reality, it’s not that simple.

To better understand this concept, we spoke with an expert on the topic: Ségolène Lebrun.


Discover the Top 4 Culture Media for EM

We asked the SuperMicrobiologists in a big survey.
Here’s what they said.

Disinfectant rotation: a concept that was misunderstood for a long time

What does “disinfectant rotation” mean?

Ségolène Lebrun: Disinfectant rotation has long been misunderstood in practice.

In the past, many sites believed that rotation simply meant using two different disinfectants. I thought the same at the beginning of my career. So sites alternated between two products, often from the same supplier, with different names… but in reality, they often belonged to the same chemical family, for example two quaternary ammonium compounds.

In that case, there is no real rotation. The chemical mode of action is the same, microorganisms are destroyed in the same way, and there is no real benefit in terms of risk control or limiting possible resistance.

The concept of rotation has been clearly clarified in the new version of Annex 1. Today, what is expected is the use of a non-sporicidal disinfectant alternated with a sporicidal disinfectant.

The goal is to use different modes of action, in order to cover the full microbiological spectrum, especially spore-forming microorganisms, which are much harder to eliminate.

So rotation is not about the product name or the supplier, but about the type of disinfectant and its mechanism of action.


Why is disinfectant rotation required?

There are two main reasons.

First: microbiological spectrum coverage. Not all disinfectants are effective against all microorganisms. Spores, in particular, are much more difficult to eliminate than vegetative forms.

That’s why Annex 1 now requires the use of a sporicidal disinfectant, alternated with a non-sporicidal one. This ensures that both non-spore-forming and spore-forming microorganisms can be eliminated.

Second: long-term risk control. Always using the same type of disinfectant with the same chemical mode of action is not a robust strategy. Rotation introduces different modes of action and strengthens overall contamination control.

Historically, rotation was often justified by the fear of resistance development. Even if this phenomenon is difficult to demonstrate, rotation remains a good practice to limit risks and make the disinfection system more robust.

Today, this requirement is clearly written into regulations. It is no longer just a recommendation, but an explicit expectation in the pharmaceutical industry.


How to disinfect your micro lab?

We went looking for solutions that can make this disinfection step easier.
.

Impact of disinfectant rotation on disinfection strategy and validation

Could we use only a sporicide?

No. Using only a sporicide does not meet the principle of rotation.

A sporicide has a different mode of action than non-sporicidal disinfectants, but rotation is based on using two complementary types of disinfectants, not just one product, even if it is sporicidal.

In addition, while sporicides are effective against spores, they are often less effective or less targeted against non-spore-forming microorganisms, such as some bacteria or yeasts, compared to dedicated non-sporicidal disinfectants.

Using only a sporicide would therefore reduce overall effectiveness across part of the microbiological spectrum.

That’s why, when defining a disinfection strategy and validating disinfectants, at least two disinfectants are always needed.


Does this mean several disinfectants must be validated?

Yes. As soon as a disinfectant rotation strategy is implemented, each disinfectant must be validated.

In practice, if a site uses a non-sporicidal disinfectant and a sporicide in rotation, both must be validated using the same principles:

  • on representative surfaces,

  • with relevant strains (pharmacopoeial strains and site isolates),

  • using the real contact times applied in routine operations.

Each disinfectant has its own spectrum, mode of action, and effectiveness conditions. Validation results from one disinfectant cannot be applied to another, even if they are used on the same surfaces.

This is why disinfectant validation can quickly become complex and costly: the more products used, the more tests are required.

That’s why it is essential to define the rotation strategy carefully from the start, to limit the number of disinfectants while remaining compliant with regulatory requirements and inspection expectations.



A big thank you to Ségolène Lebrun for answering all our questions. If you have any questions about disinfectant rotation, feel free to ask them in the comments.



Leave a Reply

Your email address will not be published. Required fields are marked *