Skip to main content

SuperMicrobiologists

Serial Dilution Automation: Is the Serial Diluter from Inlabtec Worth It?

Published on 4 June 2025 8 min

This article, commissioned by Inlabtec, is based on user feedback gathered from many microbiology labs with whom we were able to speak openly and transparently.








Currently, many microbiology labs are aiming to automate their processes.

During our recent visits, we noticed that several of them had invested in automated systems for serial dilutions. And it’s no surprise, this step is demanding in many ways.

One of the solutions used is the Serial Diluter from Inlabtec.

On paper (or in the brochure), the device offers many advantages. But what does it deliver in real lab conditions?

To find out, we spoke with laboratories of various sizes and workflows to understand how this device works in practice.

What is the Serial Diluter from Inlabtec?

A video is worth a thousand words, so here’s what a serial dilution looks like with the Serial Diluter.

This device replaces traditional glass tubes with small plastic bags. The user transfers liquid from one bag to the next. The addition of diluent and mixing are fully automated.

So, while the brochure promises a lot, we wanted to verify it directly with users.

The Serial Diluter as seen by microbiologists

To provide feedback that truly reflects real-life lab conditions, we spoke with a wide range of laboratories:

  • High-throughput contract labs (90,000 to 800,000 dilutions per year)

  • Internal labs with more moderate volumes (10,000 to 20,000 dilutions per year)


We gathered insights from technicians and lab managers to build the most complete picture possible.

Here’s what they really think about the Serial Diluter.

1 – Reducing musculoskeletal disorders (MSDs)

This was the main reason every lab gave for choosing the Serial Diluter.

Serial dilution is physically demanding, especially on the hands (carpal tunnel) and shoulders. Some labs even reported work stoppages linked to this repetitive task.

Musculoskeletal disorders are caused by multiple factors, but in labs using the Serial Diluter for over four years, two benefits were repeatedly mentioned:

  • Less strain on the hands: no need to open and close caps

  • Less strain on the shoulders: the integrated vortexer removes the need to lift the arm repeatedly


And do you really have to raise your arm more with the Serial Diluter?

To answer that, we took measurements: the top of the bags is at the same height as traditional tubes. So, no difference in height.

However, we learned about a useful trick: some labs use “short” micropipettes that allow you to pipette without raising the shoulder as much.

We also found that in some labs, technicians tilt the tube while pipetting — which lowers the height but is not a recommended practice for accuracy (pipetting should be done at 90 degrees).

2 – Reducing waste: another strength

The Serial Diluter replaces glass tubes with small plastic bags. Depending on lab practices, two setups are possible:


  • Labs that use disposable tubes

The Serial Diluter significantly reduces biohazard waste. Trash bins are lighter and less full.


  • Labs that prepare their own tubes

The gain comes from no longer needing to empty, clean, refill, and sterilize tubes — saving time, water, and energy. This also helps reduce MSDs.


A quieter lab

One unexpected but appreciated benefit: the lab is quieter. No more clinking tubes or loud trash bins filled with glass.

The overall environment is a bit more peaceful.


Note: the Serial Diluter doesn’t eliminate all waste

Each dilution is made in a small 250 mg plastic pouch that ends up in the trash.

250 mg is a quarter of a gram… hard to go any lower — unless we just get rid of dilutions altogether 

3 – Analytical throughput: not faster, but not slower

If you thought you could double your dilution speed with the Serial Diluter, think again.

The dilution principle remains the same as specified in the ISO standard, so there’s no significant gain in speed — but no loss either.

4 – Adoption in the lab: no resistance

Usually, new tools take time to be accepted in labs. But here, there was zero resistance.

All labs gave positive feedback. Why?

Because:

  • The device doesn’t replace technicians — it supports them

  • It helps reduce physical strain

  • It doesn’t disrupt workflows

  • Suppliers often offer a trial or live demo before purchase. It really helps to adopt the device.


So it’s a change that integrates smoothly, which is rare in microbiology.

5 – Training: fast and easy

Another strength: training new staff is much quicker than with traditional glass tubes.

This was especially appreciated in contract labs, where technician turnover is high and many new hires don’t have a microbiology background.


The Serial Diluter simplifies training:

  • Fewer steps (about 7 fewer on average)

  • Standardized actions (especially vortexing)


This means faster onboarding, and new team members become operational more quickly.on !

6 – More reliable results

Two major labs did comparative studies before switching, and each time the Serial Diluter produced more reliable, reproducible results.

Why?

Because homogenization, a key source of variability, is automated and standardized.

Also, when preparing diluent manually, keeping within the 9 mL ±2% range can be difficult. Labs’ metrology teams confirmed that the Serial Diluter stays within this tolerance consistently.

A real plus for avoiding audit issues.


Another common error is using the wrong dilution tube.With the Serial Diluter, that’s no longer an issue, a colored light clearly indicates which bag to pipette into.

Whereas with manual dilution, a single distraction can be enough to lose track of where you are.

7 – Device durability: tougher than it looks

We specifically asked high-throughput labs about this, because their workflows are intense and they don’t typically go easy on their equipment.

They told us they were initially concerned,  the device looks fragile. But in practice, it holds up well even under pressure, delivering the level of durability and precision one would expect from a Swiss made instrument.


Some parts do need replacing regularly (every 6 to 12 months), like tubing or the bag holder. Nothing unexpected, just standard upkeep to ensure longevity.

8 – Economic justification: easily worth it

Because choosing a solution also (and above all) comes down to economic justification. We asked the various labs how they managed to justify the purchase of the Serial Diluter.


There are two different scenarios:


  1. Labs using disposable tubes

The return on investment is fast and easy:

  • Less spending on tubes
  • Less biohazardous waste.

These laboratories chose to purchase ready-to-use diluents, packaged in 3- or 5-liter bags, which connect directly to the Serial Diluter.


  1. Labs preparing their own tubes

ROI is more indirect:

  • Fewer  MSDs (so fewer sick days)
  • Faster training
  • Time saved in tube prep

These laboratories prepare 3-liter bottles of diluent that connect directly to the Serial Diluter.


Conclusion: In all the laboratories we spoke with, economic justification was never a barrier. Perhaps simply because we’re not talking about a huge investment!

9 – Areas for improvement: Because nobody’s perfect !

No tool is perfect, and users mentioned a few things that could be improved, such as :

Space on the bench: The device takes up more room than a vortex and rack of glass tubes. You’ll need to plan for a slightly larger workspace.

Conclusion

As you’ve read, the Serial Diluter isn’t a revolutionary invention in general lab technology, but it clearly improves daily life in the lab.


As proof, none of the labs surveyed would consider going back to their glass tube dilutions !

Less pain, fewer errors, less waste and  more peace of mind. And in microbiology, that already means a lot.

As with any new technology, if you’re interested, we strongly recommend requesting a loan or at least a live demo to make sure the system fits your lab’s needs and workflow.














A big thank-you to: Audrey and Francesca, Benedicte, Hélène, Rodolphe Morel (Mérieux Nutrisciences), Matthieu Fraudeau (Eurofins), and the five other SuperMicrobiologists who chose to remain anonymous.




Leave a Reply

Your email address will not be published. Required fields are marked *