Skip to main content

SuperMicrobiologists

How Does Strain Typing Change a Listeria Contamination Investigation?

Published on 14 October 2026 6 min





This article is also available as a podcast in more than 20 languages. Click the ⚙️ Settings icon on YouTube, then choose Audio Track and Subtitles to watch it in your preferred language.



Listeria monocytogenes is found in a finished product, on a piece of equipment and on the floor of the production area.

Everything seems to suggest that the same contamination has spread through the factory.

But is it really the same strain?

We asked Benjamin Yger how typing can provide a completely different view when investigating a Listeria contamination.


Discover 7 Innovative tools to better detect

Listeria in the environment 




When you find Listeria in several places in the factory, is it always the same strain?

Benjamin Yger: No.

Several different strains can be present in the same production area at the same time.

Some are only passing through. They are detected once and then never seen again. They may have been introduced by a raw material, an ingredient, packaging or another flow, before being eliminated.

Other strains manage to become established. They can form biofilms inside equipment, better resist the conditions in the production area and eventually become dominant in this environment.

Without typing, all these detections appear under the same name: Listeria mono.

However, they do not necessarily tell the same story and they do not all play the same role in the contamination.


In an emergency, which strain do you look for first?

My priority is to identify the strain responsible for contaminating the finished product.

Of course, every presence of Listeria monocytogenes in the factory must be considered. But during a crisis, they do not all have the same level of urgency.

A strain found only once in an area far from the production line does not necessarily have the same role as a strain repeatedly detected on equipment, in the nearby environment and in the finished product.

Typing therefore helps you focus your investigation.

I can first work on the strain directly involved in the finished product contamination, and then deal with other strains that do not represent an immediate contamination risk.


In practice, what can typing help you connect?

I can compare Listeria monocytogenes strains found in raw materials, ingredients, surfaces, equipment, the environment and finished products.

Typing can determine whether several positive results come from the same strain or from different strains.

A simple detection tells me that Listeria is present. Typing helps me understand the links between the different results and rebuild the possible contamination route.

I can then look for connections between a strain, an environmental area, a production line and a finished product.


Can you discover several contamination routes in the same production area?

Yes.

I worked on a case in a factory where two different strains were found in finished products.

Typing showed that there were actually two independent contamination routes.

The first strain came from contaminated equipment.

The second was an environmental strain present on the production floor. During cleaning, poor practices caused splashes from the floor onto equipment that had already been cleaned.

Both strains eventually reached the product, but they did not follow the same route.


How does this distinction change your action plan?

It changes almost everything because the causes are different.

For the strain established inside the equipment, I will focus the investigation on dismantling, equipment design, inaccessible areas, product build-up, damaged parts or the possible presence of a biofilm.

For the strain coming from the floor, I will focus more on cleaning practices, splashes, the order of cleaning operations and possible transfers between the floor and equipment that has already been cleaned.

Without typing, the teams could have considered this as one single contamination and applied only one action plan.

Part of the problem could then have remained.

Typing makes it possible to connect specific technical actions to each identified contamination route.


Do you start an investigation with typing?

No. I see it more as the final stage of the investigation.

The first step is still to have a routine environmental monitoring program that can detect early warning signs.

When something unusual happens, you then need to launch an additional sampling plan that is wide enough to understand what is happening in the production area and start defining the limits of the contamination.

Typing becomes particularly useful when several strains have been isolated and you need to understand the links between raw materials, the environment, equipment and finished products.

So it does not replace sampling or investigation in the field.

It provides an additional level of detail once the first results are already available.


In your opinion, does this level of detail justify the additional cost?

Yes, because the value does not depend only on the cost of the analysis.

Precise information can help rule out some possibilities, target the right equipment, avoid unnecessary dismantling and confirm that the identified source is really linked to the finished product contamination.

It can also reveal several contaminations happening at the same time and requiring different action plans.

Every day saved can potentially reduce the time products remain blocked, the number of additional analyses, extra cleaning operations and the workload for the teams.

The faster the information is obtained and the more targeted the actions are, the better the chance of keeping the crisis as short as possible.

And in the end, saving time also means saving money.


Thank you to Benjamin for sharing his experience.


If you have any questions, feel free to ask them in the comments… together with the other SuperMicrobiologists, we’ll do our best to answer them.





Leave a Reply

Your email address will not be published. Required fields are marked *