Key Takeaways:
- Repeated glove disinfection may affect glove properties. It is therefore important to understand their compatibility with the disinfectants being used.
- Before increasing the frequency of glove disinfection, it is often more effective to optimize work practices inside the BSC in order to reduce the number of hand entries and exits.
We recently received the following question from a SuperMicrobiologist:
“How often do you disinfect your gloves, especially when working in a biosafety cabinet (BSC)?”
Instinctively, many microbiologists would probably answer:
- Every time aseptic conditions have been compromised
- Every time they put their hands back inside the BSC
But in real laboratories, practices seem to vary much more than that.
To better understand these practices, we published a post on LinkedIn and received many insightful comments and real-world experiences.
In this article, we share what we learned.
Important: This article is NOT an official recommendation based on guidelines or a comprehensive scientific review. It is simply a collection of field experiences and questions that probably deserve further discussion and investigation.
The First Question: Why Do We Wear Gloves?
One interesting point came up repeatedly in the comments.
Before discussing glove disinfection, we may first need to distinguish between two very different purposes of wearing gloves:
- Protecting the microbiologist
- Protecting the sample
In research environments (for example BSL-2 or BSL-3 laboratories), gloves are primarily personal protective equipment (PPE) designed to protect the user.
In contrast, in many quality control microbiology laboratories, gloves are often used mainly to protect the product or sample from contamination.
And this difference completely changes the way we think about glove disinfection.
Can Glove Disinfection Affect Glove Integrity?
The main concern is that repeated disinfection could make gloves more porous, potentially creating a contamination risk for either the operator or the sample.
The short answer seems to be: Yes.
The longer answer is more nuanced.
The risk of micro-perforations depends on several factors:
- The type of disinfectant used
- How often gloves are disinfected
- The volume of disinfectant applied
- The frequency and intensity of rubbing
- The type of glove
- The glove thickness
- The glove material
One scientific publication shared in the comments even reported a risk of glove failure after repeated exposure to alcohol-based hand sanitizers.
Are We Disinfecting Our Gloves Too Often?
Several microbiologists raised another interesting point: perhaps the real issue is not glove disinfection itself, but how laboratory manipulations are performed.
According to them, it should not be normal to constantly disinfect gloves while working in a BSC.
The first step should therefore be to optimize laboratory practices in order to reduce the number of times hands enter and leave the cabinet, since gloves are typically disinfected every time they re-enter.
Fewer unnecessary movements and fewer opportunities for contamination mean fewer disinfection cycles—and therefore a lower risk of damaging the gloves.
Simple as that.
So… How Often Should Gloves Be Disinfected?
Here again, practices seem to vary depending on the laboratory and the associated risks.
One QC microbiologist summarized their approach as follows:
“Every time we put our hands back into the BSC—that’s the minimum requirement. Then before every critical manipulation, and of course after any contact with the product being tested.”
In some laboratories, this can result in very frequent glove disinfection during a single work session.
Conclusion… and Another Debate
To summarize, glove disinfection can affect glove porosity. It is therefore not a trivial action.
The first priority should be to optimize laboratory practices in order to reduce the number of required disinfection cycles.
It is also important to consult your glove supplier to understand how resistant your gloves are to the disinfectants you use.
After all, not all gloves are created equal.
And if your supplier cannot provide a clear answer, you may need to conduct a small study in your own laboratory and write a procedure to standardize the practice.
But perhaps the first question we should ask… and one that probably deserves its own article, is this:
Do you really need to wear gloves?
And if any glove manufacturers would like to join the discussion, we would be happy to hear from them!