Skip to main content

SuperMicrobiologists

Food Microbiology: How to Stop Listeria from Spreading in your Factory?

Published on 11 September 2025 9 min

This article was created thanks to a suggestion from Mérieux NutriSciences, who wanted to highlight a key challenge in the food industry: tracking down Listeria.

Listeria is the microorganism that causes the most product recalls worldwide. In the food industry, it’s everywhere. You have to learn to live with it, control it… and make sure it doesn’t end up in your products.

Recently, we had the chance to talk with the Quality Manager of a major French brand of fresh and ultra-fresh products. He shared with us the strategy used in his factories and, most importantly, the latest tool that makes the fight against Listeria much more effective: GENE-UP® TYPER.

The testimony is anonymous (we would have loved to name this “masked SuperMicrobiologist,” but even when you’re doing great, talking about contamination is still… a sensitive topic).

Let’s get into this concrete case study, a real source of inspiration for Quality Managers fighting Listeria monocytogenes.

Understanding the Risk of Listeria monocytogenes in the Food Industry

What are your product release criteria?

Anonymous Quality Manager: Since our products have very short shelf lives, we rarely carry out release testing on finished products.

Products are still tested, and if contamination is detected, we initiate a recall.

We must be beyond reproach, which is why we closely monitor our environment, with special attention to Listeria monocytogenes.

How many Listeria tests do you run each year in your factories?

Between product testing and environmental monitoring, we perform around 55,000 tests per year.


And how many of those are positive?

We are around 1.5% positive for Listeria monocytogenes, that’s about 825 positives per year or 68 per month.


“Usually after the second cleaning, we eliminate the Listeria contamination.
But there are exceptions, and those are the ones we relentlessly track.”

How to Respond to a Listeria Contamination?

What happens when you get a positive result?

We have defined three crisis levels, depending on the severity (proximity to the product, frequency, presence of a cluster, etc.). Each level has a specific action plan. In short, we strengthen cleaning and significantly increase the number of samples taken around the affected area.

Are there early warning signs that could help detect contamination before it happens?

Yes, often. After each crisis, we do a review, and we often realize there were small warning signs we didn’t catch in time. For example: unusual contamination on a machine that should be clean.

But the real challenge now that we know this, is to detect those signals before the crisis. A dynamic mapping of environmental samples could maybe help us in that direction.

Is enhanced cleaning enough to eliminate a Listeria contamination?

In most cases, yes. When contamination occurs, we implement reinforced cleaning protocols. Usually after the second cleaning, we eliminate the Listeria contamination.

But there are exceptions, and those are the ones we relentlessly track.

Stopping the Spread of “Resident” Listeria

Would you say there are “passing” Listeria and “resident” Listeria?

Yes, when we look at clusters, we see that some appear only rarely, while others settle inside the factory… and those are the ones we really don’t want!

What are the keys to preventing a Listeria from settling in your factory?

I’d say you need a good sampling plan and maximum reactivity as soon as a signal appears. If you wait too long, the situation can quickly get out of control.

And when a Listeria becomes established, what are the real risks?

The main risk is product contamination, and ultimately risk for the consumer.
For the factory, this can mean release testing of products or even stopping some production lines.
It also generates big costs: testing, chemicals, disorganization, and team fatigue due to repeated actions.

That’s why we fight hard to prevent Listeria monocytogenes from settling in!

How do your teams cope during long crisis periods?

Honestly, not well. After two weeks of intensive cleaning, disassembly, and sampling, the teams are exhausted, especially maintenance and cleaning staff.

On the quality side, there’s commercial pressure, stress… and worst of all: doubt.

So, it’s crucial to identify the problem as early as possible, to avoid burnout.

What helps prevent a Listeria from settling in your factory?

You must not get used to recurrence. If the same strain is found twice in a workshop, even if it’s not on a contact surface, you must act before it spreads and becomes uncontrollable. That’s clearly a weak signal, and it won’t just “go away on its own.”

And concretely, what do you do in case of a “crisis”?

We bring out the heavy artillery. Between 50 and 100 tests are carried out over 1–2 days to get an overall view.

This helps us identify positive points, build hypotheses, and then confirm (or reject) them thanks to the GENE-UP® TYPER solution.


“GENE-UP® TYPER allows us to link contaminations and concentrate cleaning precisely where the strain matches the one found in the finished product.”

GENE-UP® TYPER: a key tool in the fight against Listeria

What exactly is the GENE-UP® TYPER solution?

It’s a technology developed by Mérieux NutriSciences and bioMérieux that allows genetic typing of a Listeria strain in 1 hour, with no special expertise and no heavy investment.

Basically, you can know if two strains belong to the same cluster… or if they are different.

But how does this information help you, since you have to clean anyway?

Yes, in all cases we start with deep cleaning and more sampling.

But it’s mainly in the second stage that GENE-UP® TYPER helps us. When we get back multiple positive results, we test the strains with GENE-UP® TYPER.

GENE-UP® TYPER allows us to link contaminations and concentrate cleaning precisely where the strain matches the one found in the finished product.

This saves us a lot of time and prevents teams from wasting energy cleaning or dismantling equipment that isn’t actually the source.


“We used Mérieux NutriSciences’ laboratory services for typing with GENE-UP® TYPER.”



Does it really help against “resident” Listeria ?

Yes! The device remembers all past clusters. So, as soon as a new strain is typed, we can see if we’ve already had it before.

Then we can check the places where it was found in the past and try to trace it back to the main source.

Sometimes, poorly designed machines become real hiding spots for Listeria. GENE-UP® TYPER has already helped us find unexpected contamination sites.

It’s no longer just about “yes or no, it’s Listeria mono.” The more information we have about the strain, the better we can investigate.

How did you integrate this tool into your strategy?


We did it in two steps. First, we used Mérieux NutriSciences’ laboratory services for typing with GENE-UP® TYPER.

When we saw how much it helped us, we decided to internalize it.


“We saved a huge amount of time because we knew exactly which machine to dismantle and clean.”



Do you have a concrete example where GENE-UP® TYPER was particularly useful?

Yes. In one factory, during a “crisis,” we thought we had only one Listeria monocytogenes contamination.

But GENE-UP® TYPER revealed two distinct clusters, which means two different sources. One strain was “environmental” and another was a “resident” strain on a machine.

We saved a huge amount of time because we knew exactly which machine to dismantle and clean.

As a result, the crisis didn’t last long.

Have you already used it to solve a dispute with a supplier?

Yes, it has happened. A supplier regularly sent us contaminated products with Listeria.

We warned them, but they blamed their own raw material supplier. A kind of back-and-forth that could have lasted for years…

So, we decided to analyze their deliveries for 3 months. Each time, we found the same cluster, even though they used different raw materials.We were able to prove the contamination came from their site and not from the raw materials.

The problem was solved in 3 months, with no further discussion!

How often do you use GENE-UP® TYPER?

Outside of crises, we type a few strains per month and per factory, depending on what we observe. We look for background clusters and weak signals.

In times of crisis, we push it to the maximum, but we already talked about that earlier.

What could be improved in the GENE-UP® TYPER solution?


Good question! A similar tool for Salmonella would be fantastic. Apparently, Mérieux NutriSciences and bioMérieux teams are already working on it… so stay tuned!

What advice would you give to a lab that wants to start Listeria typing?

I’d recommend starting with an external lab, to see if the technology really brings value in your context.

For example, at first we had doubts about typing accuracy and our ability to interpret results… but today I can say: it has changed the way we manage Listeria. That’s why we decided to keep using it.

What’s the future of Listeria control?

In your opinion, what will Listeria tracking look like in five years?

It’s hard to say if it will be in 5 or 10 years, but I think we’ll follow the same path as for STEC (Shiga toxin-producing E. coli).

Thanks to genetic typing, we’ll not only identify presence, but also the potential danger of each strain. We won’t just look for “Listeria mono” but also for those with concerning virulence or resistance genes.


Once again, we would like to thank this “masked SuperMicrobiologist” for sharing their insights!





One Response

  1. Appreciate the interview call on problem root cause analysis and implementing a practical strategy to counter the same. A real example that helps QC Microbiology team to study and execute ideal measures.

Leave a Reply

Your email address will not be published. Required fields are marked *