Key takeaways
- When possible, Meg recommends preparing BET dilutions in millilitres rather than microlitres to reduce the impact of pipetting errors.
- Bubbles and splashing during pipetting can cause interference, contamination between samples and problems with CV or PPC results.
- Ordinary laboratory water, including RO water, is not necessarily suitable for BET. Meg recommends using LAL reagent water from the reagent manufacturer.
This article is also available as a podcast in more than 20 languages. Click the ⚙️ Settings icon on YouTube, then choose Audio Track and Subtitles to watch it in your preferred language.
In Bacterial Endotoxin Testing (BET), even a small pipetting mistake can cause problems.
A few microlitres too many, a bubble in the pipette, or the wrong water used for dilution… and suddenly your results are not what you expected!
So how can microbiologists avoid these mistakes?
We discussed this with Meg Provenzano, who has more than 15 years of experience in endotoxin testing, including hands-on laboratory testing, technical support and now product management.
She shared some simple, practical advice on preparing dilutions, choosing pipettes and avoiding common mistakes during BET.
Do you have any tips for preparing dilutions, especially when working with small volumes?
Meg Provenzano: I always recommend using millilitres rather than microlitres whenever possible.
If you make a mistake when pipetting a few microlitres, it can have a much bigger impact than when you’re working with millilitres.
Of course, there are limitations with certain sample types, but whenever possible, I prefer larger volumes.
For example, if you’re preparing a 1:10 dilution, you can use 1 mL of sample in 9 mL of diluent, or even 0.5 mL in 4.5 mL.
It gives you a little more room for error, because we’re all human!
Personally, I also like using glass serological pipettes to prepare my dilutions.
You can see the meniscus, and as long as you’re consistent in how you read it, it works well.
Some of my colleagues prefer using pipette tips, but I usually recommend glass serological pipettes. They’re kind of the gold standard for me, and they help reduce contact between the sample and plastic materials.
Borosilicate glass dilution tubes are also a good option if you can use them.
And remember, not all pipette tips are created equal. I’ve seen some cause much more interference than others, so it’s important to choose ones that are suitable for endotoxin testing.
“I always recommend using millilitres over microlitres […] it’ll give you a lot more wiggle room to make a mistake because we’re all human.”
What other pipetting mistakes can cause problems during endotoxin testing?
Adding bubbles when you’re pipetting can cause interference, so you really want to be careful.
Another common problem with kinetic assays is splashing when you’re adding your samples or lysate to the microplate.
If the liquid splashes out of the well, it can contaminate neighbouring samples.
That can cause problems with your coefficient of variation (CV), your Positive Product Controls (PPCs), and other parts of the assay.
So even the way you’re pipetting can make a difference.
What about the water used for BET? Can microbiologists use ordinary laboratory water?
That’s another common mistake I’ve seen: people using laboratory water instead of LAL reagent water.
For example, some laboratories use water from their laboratory purification system, such as reverse osmosis (RO) water.
But that water isn’t necessarily suitable for endotoxin testing.
I recommend using LAL reagent water from the same manufacturer as your LAL reagent.
I’ve seen problems when laboratories use whatever LAL reagent water they have available, even when it comes from a different manufacturer.
Each LAL manufacturer has its own formulations, including buffers and reagent water. The buffering capacity can be slightly different from one manufacturer to another.
That’s why I recommend using the reagent water and buffers supplied by your LAL manufacturer, to avoid introducing anything that could interfere with the assay.
And this applies both when you’re preparing your dilutions and when you’re rehydrating the LAL reagent.
Ordinary laboratory water may not work well with your LAL reagent, and it could also introduce interference during dilution.
A big thank you to Meg Provenzano for sharing these simple but valuable tips from her laboratory experience!
Sometimes, improving your endotoxin testing isn’t about changing your entire method. It’s also about paying attention to the small details of your daily manipulations!
If you have any questions about endotoxins, feel free to ask them in the comments.