Key takeaways
- Endotoxins can adsorb onto certain laboratory materials, reducing the amount recovered from your sample and potentially causing false-negative BET results.
- According to Meg Provenzano, the choice of dilution tubes matters. She recommends polystyrene or borosilicate glass rather than polypropylene.
- A simple spiking study, followed by testing after approximately one hour, can help investigate whether endotoxins are being adsorbed by your consumables.
This article is also available as a podcast in more than 20 languages. Click the ⚙️ Settings icon on YouTube, then choose Audio Track and Subtitles to watch it in your preferred language.
Imagine you’re performing a Bacterial Endotoxin Test (BET), and your result is negative.
Great news! But what if some of the endotoxins in your sample have actually disappeared… into your dilution tube? 😱
This phenomenon is called endotoxin adsorption. And it can be a real problem because you may end up underestimating the amount of endotoxin in your sample.
So how does it happen? And more importantly, how can you check whether your consumables are causing the problem?
We asked Meg Provenzano, who has more than 15 years of experience in endotoxin testing, including hands-on laboratory testing, technical support and product management.
She explains why the material of your dilution tubes matters and shares a simple experiment to investigate endotoxin adsorption.
What exactly is endotoxin adsorption, and why can it be a problem for BET?
Meg Provenzano: This is something we see with polypropylene plastic, but it can happen with other materials as well.
Basically, the endotoxins present in your sample can be adsorbed onto the material you’re using.
For example, if you’re using a polypropylene dilution tube, some of the endotoxins may attach to the tube instead of remaining in your sample.
So you’re losing endotoxins from your sample, and that can lead to false-negative results.
That’s why you need to be careful about the dilution tubes you’re using.
I recommend using polystyrene or borosilicate glass tubes. And even with glass, the type of glass matters for this assay.
“So you’re losing endotoxin in your sample […] where you might get false negatives in that situation.”
How can microbiologists check whether their consumables are adsorbing endotoxins?
If you suspect adsorption, I would recommend performing a spiking study.
It’s actually a pretty simple experiment.
You add a known amount of endotoxin, using either your Reference Standard Endotoxin (RSE) or Control Standard Endotoxin (CSE) matched with your LAL reagent.
Then you wait for a certain amount of time, typically one hour, and measure how much endotoxin you can recover.
Let’s take serological plastic pipettes as an example.
I would soak the pipettes in LAL reagent water and add a known amount of endotoxin to that soaking solution or extract.
After one hour, I would test the extract to see whether I could recover the endotoxin I added.
The idea is to check that the spike is recoverable and hasn’t been adsorbed by the plastic.
You can do something similar with dilution tubes.
For example, you can add a known amount of endotoxin standard directly to the dilution tube and check how much you recover after one hour.
It’s a simple way to investigate whether the material you’re using is causing endotoxin loss.
A big thank you to Meg Provenzano for sharing another practical tip from her laboratory experience!
It’s a good reminder that in endotoxin testing, even a simple dilution tube deserves our attention!
If you have any questions about endotoxins, feel free to ask them in the comments.