Skip to main content

SuperMicrobiologists

Cleaning and Listeria: why can a clean production line release contamination when it restarts?

Published on 29 October 2026 4 min




This article is also available as a podcast in more than 20 languages. Click the ⚙️ Settings icon on YouTube, then choose Audio Track and Subtitles to watch it in your preferred language.



Cleaning is complete. The line looks clean and the test for Listeria is negative. Can you consider the restart under control?

Not necessarily.

According to Philippe Armaing, one mistake still seen in factories is testing for Listeria after cleaning while the equipment is stopped.

Under these conditions, you are mainly checking whether the equipment has been cleaned properly. But you still do not know what will happen once it starts moving again.


Discover 7 Innovative tools to better detect

Listeria in the environment 

Why static Listeria testing can miss the real problem

Do you still see manufacturers testing for Listeria only after cleaning?

Philippe Armaing: Yes. I still see quite a few manufacturers who mainly test for Listeria after cleaning.

And on top of that, they do it under static conditions.

By “static conditions,” I mean that the equipment has not been run under industrial operating conditions. It is stopped.

In that situation, you are really only checking the cleaning.

I tell some manufacturers: you are wasting money, because you are looking for a pathogen using a test that costs more than a simple cleaning verification.

Not detecting Listeria under these conditions shows that the cleaning has worked, but it does not tell you what will happen once production starts.

Run the equipment empty to check for contamination release

How can you check what really happens during restart?

You need to test for Listeria after running the equipment empty.

For a mixer, grinder or conveyor, I recommend running it empty for at least 10 to 15 minutes.

The objective is to check not only that the equipment has been properly cleaned, but also that operating it does not release contamination.

Contamination can be released from the shafts of mixer blades, grinder shafts or conveyor shafts during the restart phase.

That is what needs to be checked.

Post-cleaning monitoring is not only about checking that the equipment is clean. You also need to make sure it will not release contamination when it is restarted and returned to industrial operating conditions.

At restart, moisture can favour contamination release

What role does moisture play during restart?

The objective is to restart with production areas that are as dry as possible after cleaning.

This is still quite a common issue. During my investigations, I attend morning restart phases and you can see that production sometimes starts while there is still moisture present.

The wetter the environment is at restart, the more favourable the conditions can be for product contamination.

If production areas and equipment have not been dried sufficiently, this moisture can potentially release contamination present within equipment or conveyor bearings.

This is something that absolutely needs to be addressed.


So the first product manufactured in the morning is not necessarily the safest?

Quite often, manufacturers think that the first product made in the morning is the safest.

But potentially, it can actually be the most critical because there may still be moisture and contamination being released.

So you need to look at the actual conditions in which the line restarts, not only at its condition immediately after cleaning.



Many thanks to Philippe Armaing for sharing his experience on cleaning, production line restart and the risk of Listeria being released from equipment.

If you have a question, feel free to ask. We will do our best to answer it.

Leave a Reply

Your email address will not be published. Required fields are marked *