Skip to main content

SuperMicrobiologists

Why does Listeria establish itself so easily in food production areas?

Published on 19 October 2026 6 min





This article is also available as a podcast in more than 20 languages. Click the ⚙️ Settings icon on YouTube, then choose Audio Track and Subtitles to watch it in your preferred language.



Listeria monocytogenes has just been detected in a finished product… But where did the contamination come from?

In most cases, the contamination occurred inside the production area.

But how does the bacteria enter the production area?

And more importantly, how does it manage to become established despite cleaning operations?

We asked these questions to Benjamin Yger, an engineer specializing in microbiology and food safety with around 20 years of experience in the food industry.


Discover 7 Innovative tools to better detect

Listeria in the environment 




Before looking at how it becomes established, why does Listeria cause so many problems in fresh and ultra-fresh food production?

Benjamin Yger: Listeria has several advantages that help it survive in food production environments.

It grows well at low temperatures. It can therefore survive in production areas where temperatures are around 4 to 8 or 10°C, depending on the activity.

It can also resist cleaning conditions and form biofilms. Once introduced into the production area, it can become established in some places and become difficult to eliminate.

This is particularly important for fresh and ultra-fresh products. Their shelf life is short, and products may already have left the factory by the time microbiological results are available.

So we cannot rely only on finished product testing before release. We also need to monitor the environment and try to detect early warning signs as soon as possible.


You explain that once Listeria enters the production area, it can become established. But how does it actually get inside?

There is not just one entry route.

It can arrive with raw materials. This is often the first possibility considered. But it can also enter through operators, packaging, ingredient containers, equipment coming from outside or other flows moving through the factory.

Raw materials should therefore be assessed using a risk-based approach, but everything moving from outside into the production area should also be considered.


You explain that Listeria can enter through raw materials, packaging or other flows. But how can this introduction lead to finished product contamination several weeks later?

Based on my experience and discussions with other experts, a large proportion of finished product contamination — around 80% of cases — comes from an environmental source inside the production area.

This source may itself have been introduced by an ingredient, raw material, packaging or another incoming flow.

But introducing Listeria into the production area does not necessarily lead to immediate finished product contamination. The bacteria may first reach a surface, a piece of equipment or an area that is difficult to access.

It can then gradually become established, multiply and possibly form a biofilm. So you may not see it the day after it enters the factory.

Sometimes it is only several weeks later that it starts to spread and contaminate finished products.

This is why you should not only test raw materials or wait for a positive finished product result. You also need to monitor what is happening in the production environment.


Why do some Listeria disappear after cleaning while others become established?

Not all strains necessarily have the same ability to survive in a production environment.

Some may simply be passing through. They enter the factory, are detected once and then disappear.

Others may have genetic characteristics that help them resist better, adapt to the environment or form biofilms.

But the strain alone does not explain why contamination becomes established. I often describe it as several bad conditions coming together at the same time.

You may have a particularly well-adapted strain, a crack in the equipment, a damaged seal, a machine that has suffered impacts and cleaning that is temporarily less effective.

Each of these factors alone may not cause persistent contamination. But when they happen together, they can make the difference between Listeria that is quickly eliminated and a strain that becomes established for a long time.


You mentioned cracks, damaged seals and hard-to-reach areas. What role do equipment design and condition play in persistent contamination?

The design and condition of the equipment are very important.

A smooth and easily accessible surface is generally easier to clean. In contrast, cracks, damaged seals, corners and parts that are difficult to dismantle can retain organic material and protect bacteria during cleaning.

Equipment can also deteriorate over time. An area that was originally well controlled may gradually become a favourable place for Listeria to become established.

So it is not enough to check that the cleaning procedure is followed correctly. You also need to ask whether the equipment can really be cleaned effectively.


How do you explain why Listeria-related recalls still seem so common?

I do not think this necessarily means that the food industry has made no progress.

Food manufacturers have made major progress over the past twenty years. We understand Listeria better, we look for it more often and we have better testing methods.

So today, we are probably able to detect some contamination events that would have gone unnoticed in the past.


If finished product contamination is often the late result of an environmental problem, how can we detect it before it reaches the product?

For fresh and ultra-fresh products, it is difficult to rely only on finished product testing.

Their shelf life is short and, depending on testing times, the products may already have left the factory when the result becomes available. A hold-and-release approach is therefore not always possible, especially because of use-by dates and delivery commitments to retailers.

So we need to think differently and not rely only on the finished product.

Environmental monitoring should help detect Listeria as early as possible, before it reaches product-contact surfaces and contaminates the product.

The objective is to understand what enters the production area, what moves through it and what may be starting to become established. The earlier these warning signs are detected, the more proactive the company can be before contamination reaches the finished product.


Thank you to Benjamin for sharing his experience.



If you have any questions, feel free to ask them in the comments… together with the other SuperMicrobiologists, we’ll do our best to answer them.



Leave a Reply

Your email address will not be published. Required fields are marked *