Skip to main content

SuperMicrobiologists

How Can You Improve Your Listeria Environmental Monitoring Plan Without Increasing Your Budget?

Published on 11 November 2026 6 min





This article is also available as a podcast in more than 20 languages. Click the ⚙️ Settings icon on YouTube, then choose Audio Track and Subtitles to watch it in your preferred language.



Environmental monitoring has a cost.

So it is not possible to keep adding more and more sampling points.

For a food manufacturer, the challenge is to find the right balance between good microbiological monitoring and cost control.

We asked Benjamin Yger how to cover more areas without increasing the budget too much.


Discover 7 Innovative tools to better detect

Listeria in the environment 




Can an environmental monitoring plan stay the same for several years?

No. It should not remain fixed.

The plan was built based on an analysis performed at a specific time. This analysis considered the design of the production area, the condition of the equipment, contamination history, available results, known flows and the way production was organized.

All these elements can change.

A new machine may be installed. Equipment can become damaged over time. Flows may change. New results may show that one area is more sensitive than expected.

So I adapt the monitoring plan as the factory changes.


How often should the plan be reviewed?

I perform a full review every year based on the main trends.

I look at sampling points that are always negative, areas that regularly give positive results, equipment linked to unusual results, changes made in the production area and whether the plan is able to detect problems early enough.

But I do not wait for the annual review when an important event occurs.

A finished product contamination, an unusual early warning sign or a change to the production line may justify an immediate change to part of the plan.


Can you reduce sampling at a point that is always negative?

Yes, gradually.

For example, imagine a machine where one hundred samples are taken every year without any detection for one, two or several years.

I would not necessarily recommend removing this control completely. The point was probably selected for a reason, and it may still be useful to monitor it.

However, its frequency can be reduced step by step: from one hundred analyses to eighty, and perhaps later to fifty, while keeping a minimum level of monitoring.

I then reallocate the available analyses to other areas. This approach keeps the overall cost similar while increasing monitoring where it is now more useful.


Where should the available analyses be reallocated?

I move them towards areas with more uncertainty or early warning signs.

This could be a new piece of equipment, an area that is difficult to clean, a location where a few detections have already occurred, a part of the production area that is not well covered, a recently changed flow, aging equipment or an area located between two different hygiene zones.

The monitoring plan then becomes dynamic.

Analyses are no longer fixed in an old historical distribution. They are used according to the information currently available.


How can you cover more areas without adding more analyses?

Another solution is to rotate between equivalent sampling points.

In many factories, for example, the plan may simply say “sample conveyor A.” In practice, the person often samples exactly the same place on the conveyor every time.

I recommend identifying several relevant points on the same equipment: A1, A2 and A3.

When the plan asks for conveyor A to be checked, the sample is taken from one of these points in rotation.

The number of analyses does not change. But over the year, a larger part of the equipment will have been monitored.


Are all sampling points on the same equipment really equivalent?

They should belong to the same type of risk.

The objective is not to randomly replace a critical point with a surface that is easy to clean.

I prepare the rotation in advance by identifying several areas with a similar level of interest.

On a conveyor, for example, these may be different return points, connections or structural parts.

Rotation increases coverage without losing the consistency of the monitoring plan.


What events should trigger an immediate change to the environmental monitoring plan?

The main warning sign is a contamination event that was not predicted by the environmental monitoring results.

If a finished product is positive while the monitoring plan has shown for several weeks that everything is fine, there is probably a gap in the system.

I then ask which part of the production line was not monitored, which flow was not considered, whether the sampling points were too fixed, whether the selected surfaces were too easy, or whether sampling was performed at the right time.

I do not change the plan just for the sake of changing it. I change it when the results show that it is no longer predictive or proactive enough.


How do you find the right balance between quality, overcontrol and cost?

There is also an economic reality.

Even if we wanted to test thousands of points, resources are limited.

The goal is therefore not to increase sampling without a clear reason. It is to maximize the value of each analysis.

A sample taken for several years from the same place without ever providing new information may be less useful than a sample taken from an area that is still poorly understood.

Reallocating analyses and rotating sampling points can improve the monitoring plan without necessarily increasing its total cost.



Thank you to Benjamin for sharing his experience.


If you have any questions, feel free to ask them in the comments… together with the other SuperMicrobiologists, we’ll do our best to answer them.






Leave a Reply

Your email address will not be published. Required fields are marked *