Skip to main content

SuperMicrobiologists

Microbiological Contamination in the Production Environment: What Should You Do After a Positive Result?

Published on 30 October 2026 5 min




This article is also available as a podcast in more than 20 languages. Click the ⚙️ Settings icon on YouTube, then choose Audio Track and Subtitles to watch it in your preferred language.



The sample was collected on Monday. The positive result comes back on Tuesday. In the meantime, the line has continued producing, routine cleaning has been performed, and several batches may already be affected.

This is when the result leaves the laboratory and becomes a production, supply chain, communication and sometimes regulatory issue.

We asked François Bourdichon to describe, step by step, what really happens in a food production facility when contamination is detected.


Discover 7 Innovative tools to better detect

Listeria in the environment 




What is the first action when Listeria is detected close to the product?

François Bourdichon: At least twenty-four hours have usually passed between sampling and the result. During that time, production has continued, routine cleaning has been performed, and the line has often already restarted.

The first action is therefore to put the potentially affected production on hold, to make sure that nothing leaves the site until the risk has been assessed.

This does not mean that we automatically stop the entire production line. We first look at where the positive result was found and whether there is a possible route of contamination to the product.


How do you decide what to do next?

We assess whether the location where the microorganism was found could have an impact on the finished product or on consumer health.

We immediately review all available information: the performance of heat treatments, cleaning operations, ventilation, events that occurred during production, and the results obtained on finished products.

If the environmental result reveals a potential risk to the product, we prepare to inform the authorities. But the authorities do not only want to receive a positive result: they also want to understand its possible origin and know what action plan has been initiated.

We therefore start building the case within forty-eight to seventy-two hours, using the available information, the products concerned, the risk assessment and the first actions taken… “Trust is built in times of peace, not in times of war.”


What do you do around the positive sampling point?

We immediately return to the area and take multiple additional samples around the initial positive point. These are known as “vector samples”.

We also perform additional cleaning, then resample the same points to compare the situation before and after the intervention.

As soon as we have a hygiene or safety deviation, we move to an intensified monitoring plan. This applies to the environment, but also, when necessary, to finished products: more testing, batches placed on hold and systematic testing before release.

We remain under this intensified plan until we have demonstrated, over a sufficient period of time, that the situation has returned to a satisfactory level.


Do you have to stop the production line?

It depends on where the result was obtained, the process and the capabilities of the site.

In our dairy activities, it is rare that we can stop a line for several days, particularly because the milk continues to arrive. We therefore have validated enhanced cleaning procedures, sometimes referred to as “resets”, that are prepared in advance.

Depending on the situation, these procedures can allow us to return to a satisfactory hygiene level within twenty-four hours and restart production.

But restarting the line does not mean immediately releasing the products. Potentially affected production remains on hold, and intensified monitoring continues until we are confident that the situation is under control.


Why not perform this enhanced cleaning all the time?

Because it would be counterproductive. I often use the example of teeth: we brush them every day, but we do not have them professionally cleaned every day. Routine cleaning maintains the expected level; the reset is reserved for deviations. We only return to the routine plan after a satisfactory period of intensified monitoring. And all of this needs to be written down before the first positive result: you cannot improvise during a crisis.


Can holding batches become difficult for the production site to manage?

Of course. Moving to intensified monitoring creates additional work for the teams and can create tensions with the supply chain.

But the reasoning remains simple: these are our products, our brand and our consumers. It is better to hold the batches and lose two or three days while we understand the situation than knowingly take the risk of exposing consumers to a potentially dangerous product.

When a detection occurs, we put the products on hold and trigger our internal procedure for managing positive results, including all the necessary communication across the site and the relevant teams.



Thank you to François for describing what happens behind the scenes after a positive result.


Do you have any questions or experiences to share? Let us know in the comments.





References and further reading

• DGAL/SDSSA/2023-14 Instruction — notification related to food products and the production environment

• French guide for managing food safety alerts — 2026 update

• DGAL/SDSSA/2023-27 Instruction — reference, routine and intensified monitoring plans for Listeria

• EURL Listeria — official technical guidance

Leave a Reply

Your email address will not be published. Required fields are marked *