Being a microbiologist is a profession… but it’s also about great stories and meaningful encounters.
On the SuperMicrobiologistes blog, we want to highlight the “poetic”, “funny”, and deeply “human” side of microbiologists through inspiring texts.
So here it is, like a laboratory fable, the story of a microbiologist and her BSC.
Enjoy the read
My biological safety cabinet is a FASTER Type II BH EN 2000 BSC.
It’s not exactly young. My company got it when they got me 😅 … so it’s over 22 years old… well, I’m not that old 😂. Anyway, we’re both still going strong.
Over all these years, it’s only had two tiny hiccups (not sure that expression is still in style 🤪): one filter saturation and one faulty window strut. But despite a relocation, it still runs like clockwork. That’s its biggest strength, extremely reliable. It has never let me down. It’s also very robust: it’s been moved, shaken, even used at one point in prefabricated buildings (Portakabin-type labs), and yet I’ve always been able to count on it. Its simplicity is also a real advantage in day-to-day work.
Alright, it’s not the quietest… it likes to make itself heard in the lab atmosphere. But honestly, I make more noise than it does when I start complaining.
The front window height is fixed and not adjustable. You might think that’s inconvenient, but it’s actually another strength, it ensures consistent safety for both the process and the operator, since the sash is always at the correct height. You just need a properly adjusted chair to work comfortably. In fact, I recommend that labs with multiple technicians assign a dedicated chair to each person, always set at the right height. It avoids poor posture… and uncomfortable posture often goes hand in hand with contamination risks.
Speaking of contamination, maintenance is a key aspect 🧽. Personally, I clean the work surface before and after each operation using a detergent/disinfectant spray (two types rotated monthly). I also perform a more thorough cleaning at the end of each week: side panels, back wall, light, underside of the bench, and the inside of the sash,with spray and 70% alcohol. One tip: never, ever use bleach, stainless steel can rust. Another tip: avoid spraying cleaning products directly onto surfaces while the BSC is running, as this can quickly clog the filters.
Since I’m on a roll with advice, here’s another one: the less your wipes release particles or fibers, the better your filters will perform. And never let go of the wipe while the BSC is running, otherwise it will get sucked in, and that’s a guaranteed headache (with a call to your service engineer).
As for operation, it’s incredibly simple: ON/OFF, low speed or high speed. In my lab, it stays on from Monday morning to Friday evening (it also deserves its weekend off). I used to run it at low speed overnight and high speed during working hours, but in our new facilities we must maintain specific pressure conditions. Changing the BSC speed disrupts that, so now it runs at high speed all the time. The inflow and downflow velocities are checked daily, and their stability is impressive (0.45 for inflow and 0.40 for downflow, every day for over 20 years).
On a daily basis, I even use the holes in the work surface as a holder for my forceps … pretty handy.
A full check-up is carried out once a year to verify compliance, it always passes with flying colors. I also check surface contamination weekly.
And finally, if I may suggest a few improvements to manufacturers (thanks to the engineers):
- Plan for a waste disposal system that doesn’t require leaving the BSC, such as a pass-through hatch. Waste buildup (filtration units, filter holders, used pipettes, etc.) significantly increases the risk of contamination, just like constantly moving in and out of the cabinet to discard it.
- Include a retractable UV lamp and a retractable gas inlet, so they can be removed during the initialization phase.
- Avoid any protruding screws, they can really hurt your fingers during cleaning, and eliminate hard-to-reach corners where dirt can accumulate 🧹 (especially under the work surface).
In conclusion, I’d say that a Biological Safety Cabinet is a friend that wants the best for you!
You too, come and share your story as a microbiologist. Get in touch with us!
One Response